GETTING STARTED GUIDE
NI PXIe-4610
Power Amplifier
This document explains how to install, configure, and set up the NI PXIe-4610 power amplifier.
NI-DAQmx 9.8 has added support for the NI PXIe-4610 device. To download the NI-DAQmx
driver, visit
ni.com/info
and enter the Info Code
daqmx
.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) as stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in its intended operational electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful
interference will not occur in a particular installation, when the product is connected to a test
object, or if the product is used in residential areas. To minimize the potential for the product to
cause interference to radio and television reception or to experience unacceptable performance
degradation, install and use this product in strict accordance with the instructions in the product
documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
This product may become more sensitive to electromagnetic disturbances
in the operational environment when test leads are attached or when connected to a
test object.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of all I/O cables
must be no longer than 3 m (10 ft).
Caution
Using the NI PXIe-4610 in a manner not described in this document may
impair the protection the NI PXIe-4610 provides.
ni.com/manuals
Deutsch
Français
