2
|
ni.com
|
NI PXIe-4610 Power Amplifier Getting Started Guide
Unpacking
The NI PXIe-4610 module ships in an antistatic package to prevent electrostatic discharge from
damaging device components. To prevent such damage when handling the device, ground yourself
using a grounding strap or by holding a grounded object and complete the following steps:
1.
Touch the antistatic package to a metal part of the grounded object before removing the
device from package.
2.
Remove the device from the package and inspect the device for loose components or any
other sign of damage.
Notify NI if the device appears damaged in any way. Do not install a damaged module into your
system. Store the module in the antistatic package when not in use.
Verify the Kit Contents
The following items are necessary to set up and use the NI PXIe-4610:
•
NI PXIe-4610 Power Amplifier Module
•
Two 2-terminal detachable screw-terminal connectors
•
NI PXIe-4610 Getting Started Guide
Other Equipment
The following additional items, not included in the device kit, are necessary to operate the
NI PXIe-4610:
•
NI-DAQmx
•
PXI Express chassis with
–
controller, or
–
MXI-Express (card or built-in)
•
Signal source to drive the input to the amplifier
•
LabVIEW 2010 or later (optional)
