56 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
Figure 6-2
Mechanical Components of the Controller Module
Table 6-1
Mechanical Components of the Controller Module
Number
Description
1
Release Lever
2
Thumb Screw
The following are detailed steps for removing the controller module from the system
chassis.
Use a Phillips screwdriver to loosen the thumb screws on each release levers.
Pull down both release levers at the same time and then pull out about half length of the
controller module by holding two release levers.
Use one hand to hold one end of the controller module (the side with release levers) and
the other hand hold the bottom of the controller; pull out the controller module until it is
free from the system chassis.
Summary of Contents for XCubeDAS XD5324D
Page 83: ...Support and Other Resources 69...