Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 12 -
4.3 Annotation
Safety foot pedal switch
Foot pedal is another way to control the start and
stop roller rotating.Step on the foot pedal, press the
direction button to adjust the speed, then the roller
runs, roller stops when loose.
NOTE: The protect sensor can't be used with foot
pedal together. Please pay more attention to protect
your hand during foot pedal operation.
Working table and Pressure board
Working table (A) and pressure board (B) are used to
put tension on media and parallel with film edge. A
and B are moveable. Take off the working table when
install/uninstall the media or clean the roller. Take
off pressure board when preparing the laminating,
put it back when preparation is ready.
Take down working table
1. Press the button to open the plug.
2. Hold the middle and lift.
3. Hold the middle and pull out.
