Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 5 -
II. Installation
2.1 installation precautions
1. Before unpacking, carefully check if there is damage for the packing and machine during
transportation.
2. After unpacking, check if the service parts are correct as the packing list.
3. The installing place should be provided enough space for operating and free of dust, no
vapor, no corrosive gas, no combustible or explosive substance around. Keep the machine
away from wind blowing place, otherwise will affect the roller temperature which might
bring the laminating quality.
4. After installation, adjust each caster to reach level ground. The casters only be used on
even ground for short distance movement.
Notice: Please move carefully since it is heavy equipment.
2.2 The stand floor rack assembly
1) Take out the parts from the packing.
2) Assembling two legs and all shafts according to the picture.
3) Install the casters to the left and right leg. (wo caster w/ brake and two w/o brake were
installed in a diagonal).
1.
Left and right leg 2. Two caster w/ brake, two w/o brake. 3. Top shaft.
