Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 27 -
8.2 Cleaning
1. To extend the lifetime of the machines, please ensure the machine are clean.
2. Make sure environment clean and keep away from obstacles.
8.3 Checking
In order to ensure your safety, please check the safety of the machine regularly. If you find
failures in the check, please refer to the section of Trouble shooting and solution. If you
need to reset the pressure, please refer to the section of Pressure setting.
8.3.1 Visual Checking
Visual checking prior to maintenance.
1. power supple cable undamaged.
2. Caster is stable.
3. Any damage on machine
8.3.2 Safety Parts Checking
Emergency switch
1. Turn on machine
2. press the emergency switch, machine stop or not
3. Turn on machine when emergency switch is on
4. Release the emergency switch, turn on and start to run machine.
Photocell checking
1. turn on the machine
2. roller rotating
3. hide the photocell, check roller rotating or not
4. move the obstacle, check roller rotating or not.
Caution: When use the pedal switch, the optical switch does not work.
Attention!
Through poor conditions of the electrical MAINS, shortly voltage drops can appear when
starting the EQUIPMENT. This can influence other equipment (eg. Blinking of a lamp). If the
MAINS-IMPEDANCE Zmax<0.300 OHM, such disturbances are not expected. (In case of
need, you may contact you local supply authority for further information.)
