QNO QVF8034, User Manual

Page: 38 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
32
Shared- Circuit
WAN
environment
If your WAN connects to a Switch, select “Enabled” to filter
broadcast packets. The default is “Disabled”.
MTU
：
： ：
： MTU is abbreviation of Maximum Transmission Unit. “Auto” and
“Manual” can be chosen. The default value is 1500. Different value
could be set in different network environment. (e.g. ADSL PPPoE
MTU: 1492)
The default is “Auto”.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave without making any changes.
Transparent Bridge
If all Intranet IP addresses are applied as Internet IP addresses, and users don’t want to
substitute private network IP addresses for all Intranet IP addresses (ex. 192.168.1.X), this
function will enable users to integrate existing networks without changing the original structure.
Select the Transparent Bridge mode for the WAN connection mode. In this way, users will be able
to connect normally with the Internet while keeping the original Internet IP addresses in Intranet
IP configuration.
If there are two WANs configured, users still can select Transparent Bridge mode for WAN
connection mode, and load balancing will be achieved as usual.