QNO QVF8034 User Manual Download Page 45

Page: 45 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router

range of self-defined strategy.

Note!

China Netcom strategy and self-defined strategy can coexist. However, if a

destination IP is assigned by both China Netcom strategy and self-defined

strategy, China Netcom strategy will take priority. In other words, traffic to that

destination IP will be transmitted through the WAN (or WAN group) under China

Netcom strategy.

6.2.2 Network Detection Service

This is a detection system for network external services. If this option is selected, information

such “

Retry

” or “

Retry Timeout

” will be displayed. If two WANs are used for external connection,

be sure to activate the NSD system, so as to avoid any unwanted break caused by the device

misjudgment of the overload traffic for the WAN.

Summary of Contents for QVF8034


















































































































































































































Search results

Summary of Contents for QVF8034

Reviews:

Related manuals for QVF8034

Brands by name

Popular brands

QNO QVF8034, User Manual

Search results

Summary of Contents for QVF8034

Reviews:

Related manuals for QVF8034

Brands by name

Popular brands