QNO QVF8034, User Manual

Page: 47 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
41
for 10.0.0.1~10.254.254.254 cannot be transmitted through
WAN 2, and there is no need to remove the connection when
WAN 1 is disconnected.
(2)
Keep System Log and Remove the Connection:
If an ISP
connection failure is detected, no error message will be
recorded in the System Log. The packet transmitted through
this WAN will be shifted to the other WAN automatically, and
be shifted back again when the connection for the original
WAN is repaired and reconnected.
This option is suitable when one of the WAN connections fails
and the traffic going through this WAN to the destination IP
should go through the other WAN to reach the destination. In
this way, when any of the WAN connections is broken, other
WANs can serve as a backup; traffic can be shifted to a WAN
that is still connected.
Detecting Feedback Servers:
Default
Gateway:
The local default communication gateway location, such as the
IP address of an ADSL router, will be input automatically by the
device. Therefore, users just need to check the option if this
function is needed. Attention! Some gateways of an ADSL
network will not affect packet detection. If users have an optical
fiber box, or the IP issued by ISP is a public IP and the gateway
is located at the port of the net café rather than at the IP
provider’s port, do not activate this option.
ISP Host:
This is the detected location for the ISP port, such as the DNS IP
address of ISP. When configuring an IP address for this function,
make sure this IP is capable of receiving feedback stably and
speedily. (Please input the DNS IP of the ISP port)
Remote Host:
This is the detected location for the remote Network Segment.
This Remote Host IP should better be capable of receiving
feedback stably and speedily. (Please input the DNS IP of the ISP
port).
DNS Lookup
Host:
This is the detect location for DNS. (Only a web address such as
www.hinet.net is acceptable here. Do not input an IP address.)