QNO QVF8034, User Manual

Page: 13 / 209

2WAN 4LAN SMB Multi-WAN VPN QoS Router
7
III. Hardware Installation
In this chapter we are going to introduce hardware interface as well as physical
installation.
3.1 Router LED Signal
LED Signal Description
LED Color Description
Power
Green Green LED on: Power ON
DIAG
Amber Amber LED on: System self-test is running.
Amber LED off: System self-test is completed
successfully.
Link/Act
（
Green light at the
right of the port
）
Green Green LED on: Ethernet connection is fine.
Green LED blinking: Packets are transmitting through
Ethernet port.
100M- Speed
（
Amber light at the
left of the port
）
Green Green LED on: Ethernet is running at 100Mbps.
Green LED off: Ethernet is running at 10Mbps.
Connect
Green Green LED on: WAN is connected and gets the IP address.
Reset
Action Description
Press Reset Button For 5 Secs
Warm Start
DIAG indicator: Amber LED flashing slowly.
Press Reset Button Over 10 Secs Factory Default
DIAG indicator: Amber LED flashing quickly.
System Built-in Battery
A system timing battery is built into Router. The lifespan of the battery is about 1~2 years.
If the battery life is over or it can not be charged, Router will not be able to record time
correctly, nor synchronize with internet NTP time server. Please contact your system supplier
for information on how to replace the battery.
Attention!
Do not replace the battery yourself; otherwise irreparable damage to the product may
be caused.