Gigabit Switch
84
mapped to queues based on the CoS value in the VLAN tag.
IP Precedence
: All IP traffic is mapped to queues based on the IP
Precedence field in the IP header. If traffic is not IP traffic, it is mapped
to the lowest priority queue.
None
: All traffic is mapped to the lowest priority queue.
Apply
Click
Apply
to save your changes to the switch.
3.6.2.2 Port Settings
Click
QoS
→
QoS Basic Mode
→
Port settings
in the navigation panel to display the screen
as shown below.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Port
Select one or multiple ports to configure
Apply
Click Apply to save your changes to the switch.
Trust
Select the port trust state.
Enabled
: Traffic from this port will follow the global trust type.
Disabled
: Traffic will always go to the lowest priority queue.
