Gigabit Switch
14
settings.
Dynamic Address Setting
This link takes you to configure the Dynamic Address
settings.
Dynamic Learned
This link takes you to a screen where you can to view the
Dynamic Address settings information.
Security
Storm Control
This link takes you to a screen where you can limit the
number of broadcast, multicast and unknown unicast and
multicast packets the Switch receives per second on the
ports.
Protected Ports
This link takes you to a screen to setting and revising the
protected ports.
DoS
This link takes you to configure DoS setting to enable/disable
DoS function and all others related in the sub-menu.
Access
This link takes you a way to access the switch.
QoS
General
This link takes you to a screen where you can configure QoS
through the sub-menu, including QoS Priorities, Port
Settings, Queue Settings, CoS Mapping, DSCP Mapping,
and IP Precedence Mapping.
QoS Basic Mode
This link takes you to a screen where you can configure the
QoS Basic Mode through the sub-menu, including the Global
Settings and the Port Settings.
Rate Limit
This link takes you to a screen where you can configure the
QoS Rate Limit through the sub-menu, including Ingress
Bandwidth Control, Egress Bandwidth Control, and Egress
Queue.
Management
LLDP
This link takes you to a screen where you can set and revise
the LLDP.
SNMP
This link takes you to a screen where you can set and revise
the SNMP.
Diagnostics
Cable Diagnostics
This link takes you to a screen where you can do Copper test
on each port.
Ping Test
This link takes you to a screen where you can do Ping test.
Ping6 Test
This link takes you to a screen where you can do Ping6 test.
Logging Setting
This link takes you to a screen where you can configure log
settings.
Factory Default
This link takes you back to the factory default configuration.
Reboot Switch
This link takes you to a screen where you can reboot the
switch.
