Gigabit Switch
32
Server port
Input time server port number. Default is 123.
3.3 Switching
Use the Switching pages to configure settings for the switch ports, trunk, Layer 2 protocols and
other switch features.
3.3.1 Port Setting
This page allow user to configure switch port settings and show port current status.
Click
Switching
→
Port Setting
in the navigation panel to display the screen as shown below.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Port Select
Select the port(s) from the list box that you will change the port settings for.
Enabled
Select
Enable
from the drop-down box to enable a port. The factory
default for all ports is enabled. A port must be enabled for data
transmission to occur. Select
Disable
to not use a port.
Speed
Port speed capabilities:
Auto:
Auto
speed with all capabilities.
Auto-10M:
Auto speed with 10M ability only.
