Gigabit Switch
104
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Target
Select the target to store log message
Buffered
: Store log messages in device buffer. All log messages will
disappear after system reboot.
FLASH
: Store log messages in FLASH. All log messages will not disappear
after system reboot.
Severity
Select severity of log messages which will be stored.
Apply
Click
Apply
to save your changes to the switch.
Status
It displays the status of local log settings.
Target
It
displays the target you’ve chose.
Severity
It displays the severity status.
Delete
Click
Delete
to delete the target chose.
3.8.4.3 Remote Logging
This page allow user to configure remote logging server information
Click
Diagnostics
→
Logging Setting
→
Remote
Logging
to view the screen as shown next.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Server IP
The IP address of remote log server.
Server Port
Enter a number between 1 and 65535 as the server port.
Severity
Select severity of log messages which will be sent.
Facility
Select facility of log messages which will be sent.
