Gigabit Switch
60
Apply
Click
Apply
to save your changes to the switch.
3.3.8.2 STP Port Setting
This page allow user to configure general setting of STP port and browser CIST port status.
Click
Switching
→
STP
→
STP Port Setting
.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Port Select
Select the port(s) to change spanning tree protocol settings for.
Path Cost
Path cost is the cost of transmitting a frame on to a LAN through that port. It is
recommended to assign this value according to the speed of the bridge. The
slower the media, the higher the cost. Entering 0 means the switch will
automatically assign a value.
Edge Port
Set the edge port configuration:
No:
Force to false state ( as link to a bridge).
Yes:
Force to true state ( as link to a host).
P2P MAC
Set the Point-to-Point port configuration:
No:
Force to false state.
