Gigabit Switch
34
The Mirror Configuration steps are as follows:
Click
Switching
→
Mirror
→
Local Mirror Setting
in the navigation panel to display the
screen as shown below.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Session ID
Select mirror session ID
Monitor session
state
Select mirror session state : port-base mirror or disable
Destination Port
Select mirror session destination port
Allow-ingress
Select destination port ingress state.
Sniffer Rx ports
Select mirror session source rx ports only select portbased-enabled state,
t
his field is valid only when “
Monitor session state
” is port-base mirror
Sniffer Tx ports
Select mirror session source tx ports only select portbased-enabled state,
this field is valid only when “
Monitor session state
” is port-base mirror
Apply
Click
Apply
to save your changes to the switch.
