manualshive.com logo in svg

QNAP TS-859 Pro+, User Manual, Page: 58 / 242

Share
Download
QNAP TS-859 Pro+ User Manual Download Page 58

 58 

 

 

3.2.3

 

HDD SMART 

This page enables the users to monitor the hard drive health, temperature, and the 
usage status by the hard disk S.M.A.R.T. mechanism. 
 
Select the hard drive and you can view the following information by clicking the 
corresponding buttons. 

Field Description 

Summary 

Displays the hard drive S.M.A.R.T. summary and the latest test 
result. 

Hard disk 
information 

Displays the hard drive details, e.g. model, serial number, drive 
capacity. 

SMART 
information 

Displays the hard drive S.M.A.R.T.    Any items that the values 
are lower than the threshold are regarded as abnormal. 

Test 

To perform quick or complete hard drive S.M.A.R.T. test and 
display the results. 

Settings Configure 

the 

temperature 

alarm.    When the hard drive 

temperature is over the preset values, the system records the 
error logs. 
You can also configure quick and complete test schedule.    The 
latest test result is shown on the Summary page. 

 

 

Summary of Contents for TS-859 Pro+



















































































































































































































































Reviews:

No comments