manualshive.com logo in svg

QNAP TS-859 Pro+, User Manual, Page: 122 / 242

Share
Download
QNAP TS-859 Pro+ User Manual Download Page 122

 122 

 

 

3.5.2

 

Multimedia Station 

To share photos, music or video files on the NAS over the network, enable 
Multimedia Station.    For further information of Multimedia Station, iTunes service 
and UPnP Media Server, please refer to Chapter 4. 

 

 

3.5.3

 

Download Station 

The NAS supports PC-less BT, HTTP, and FTP download.    To use download function 
of the NAS, please enable Download Station.    For further information, please refer 
to Chapter 5. 

 

 

Warning:

 Please be warned against illegal downloading of copyrighted 

materials.    The Download Station functionality is provided for downloading 
authorized files only.    Downloading or distribution of unauthorized 
materials may result in severe civil and criminal penalty.    Users are subject 
to the restrictions of the copyright laws and should accept all the 
consequences. 

 

Summary of Contents for TS-859 Pro+



















































































































































































































































Reviews:

No comments