manualshive.com logo in svg

QNAP TS-859 Pro+, User Manual, Page: 219 / 242

Share
Download
QNAP TS-859 Pro+ User Manual Download Page 219

 219 

 

 

10.6

 

System Temperature Protection 

 
The system shuts down automatically for hardware protection when any of the 
following criteria is met: 

9

 

The system temperature exceeds 70°C (158°F) 

9

 

The CPU temperature exceeds 85°C (185°F) 

9

 

The hard drive temperature exceeds 65°C (149°F)* 

 
* Note that when the temperature of any hard drives on the NAS exceeds 65°C 
(149°F), the NAS waits for the standby time (configured in “System Administration” 
> “Hardware”) and another 10 minutes and will shut down automatically.    For 
example, if you have configured the NAS to enter the standby mode after idling for 
5 minutes, the NAS shuts down automatically when the temperature of any hard 
drive(s) exceeds 65°C (149°F) continuously after 15 (5+10) minutes. 
 

Summary of Contents for TS-859 Pro+



















































































































































































































































Reviews:

No comments