manualshive.com logo in svg

QNAP TS-859 Pro+, User Manual, Page: 123 / 242

Share
Download
QNAP TS-859 Pro+ User Manual Download Page 123

 123 

 

 

3.5.4

 

Surveillance Station 

The Surveillance Station enables you to monitor and record the live video of 
maximum 2-4* network cameras available on the network (LAN or WAN). 
 
*This function is applicable to some models only.    Please refer to the comparison 
table for more details: 

http://www.qnap.com/images/products/comparison/Comparison_NAS.html

 

 

Note:

 To use this feature on TS-x39/509/809 series, please update the system 

firmware with the image file enclosed in the product CD or download the latest 
system firmware. 

 

 

Click “Surveillance Station” on the top or on the login page of NAS to access the 
Surveillance Station.    If you login the service from the login page of the NAS, you 
are required to enter the user name and password. 
 

Note:

 The Surveillance Station is only supported on IE browser 6.0 or later. 

Summary of Contents for TS-859 Pro+



















































































































































































































































Reviews:

No comments