QNAP TS-859 Pro+ User Manual Download Page 142

Page: 142 / 242

142

3.6.3

Remote Replication

3.6.3.1

Remote Replication

You can use this option to back up the files on the NAS to another QNAP NAS or
Rsync server over LAN or the Internet.

Make sure a network share is created before creating a remote replication
task.

Port Number:

Specify a port number for remote replication. The default port

number is 873.

Note:

If this server connects to the Internet via a router, make sure the

specified port for remote replication is opened on the router.

Enable backup from a remote server to the local host:

Check this option

to allow the remote server to back up data to the local host via remote
replication.

Allow remote Rsync server to back up data to NAS:

Enable this option to

allow a remote Rsync server to back up data to the NAS by remote replication.

Summary of Contents for TS-859 Pro+


















































































































































































































































Search results

Summary of Contents for TS-859 Pro+

Reviews:

QNAP TS-859 Pro+, User Manual, Page: 142 / 242

Search results

Summary of Contents for TS-859 Pro+

Reviews: