QNAP QHora-301W User Manual Download Page 59

Page: 59 / 68

You can configure DMZ rules only on configured WAN interfaces that are not in use by port

forwarding rules.

Configuring DMZ Settings

1. Go to NAT/Firewall > NAT > Demilitarized Zone (DMZ).

2. Identify a DMZ rule.

Note

• 1GbE WAN port 1 is used as the default interface for the DMZ rule.

• Each configured WAN port is allowed one DMZ rule.

Click

The DMZ Settings window appears.

4. Specify the subnet IP address for the DMZ rule.

5. Click Apply.

QuRouter applies the settings.

Click

QuRouter enables the DMZ rule.

Deleting a DMZ Rule

1. Go to NAT/Firewall > NAT > Demilitarized Zone (DMZ) .

2. Identify a DMZ rule.

Click

QuRouter deletes the DMZ rule.

Discovery Settings

QuRouter enables you to locate and manage network infrastructure on your domain.

Configuring Universal Plug and Play (UPnP)

Universal Plug and Play (UPnP) is a networking protocol that enables dynamic port opening for peer-to-peer

device communication on the network.

Important

Enabling UPnP makes the device discoverable on the internet and vulnerable to malware

infections. Disable when not in operation.

1. Go to NAT/Firewall > UPnP .

Click

The device enables the UPnP function.

QHora-301W User Guide

Security Settings

Summary of Contents for QHora-301W





































































Search results

Summary of Contents for QHora-301W

Reviews:

Related manuals for QHora-301W

Brands by name

Popular brands

QNAP QHora-301W, User Manual

Search results

Summary of Contents for QHora-301W

Reviews:

Related manuals for QHora-301W

Brands by name

Popular brands