QNAP QHora-301W User Manual Download Page 27

Page: 27 / 68

Editing the Device Name

1. Go to System > System Settings > Device Name Settings .

Click

The Edit Device Name window appears.

3. Specify device name that consists of 3 to 15 characters from any of the following group:

Valid characters: A–Z, a–z, 0–9

4. Click OK.

QuRouter updates the device name.

Restart, Reset, Backup, and Restore

QuRouter system settings allows you to remotely control the restart, reset, backup, and restoration

operations of the router.

Restarting the Router

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Restart.

A confirmation message appears.

3. Click OK.

QuRouter restarts the device.

Resetting the Router

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Reset.

A confirmation message appears.

3. Click I agree.

4. Click OK.

QuRouter resets the device to default settings and the router is unbound from QNAP ID.

Backing Up System Settings

1. Go to System > System Settings > Restart / Reset / Backup / Restore .

2. Click Backup.

The device exports the system settings as a BIN file and downloads the file to your computer.

Restoring System Settings

Warning

If the selected backup file contains user or user group information that already exists on

the device, the system will overwrite the existing information.

QHora-301W User Guide

System Configuration

Summary of Contents for QHora-301W





































































Search results

Summary of Contents for QHora-301W

Reviews:

Related manuals for QHora-301W

Brands by name

Popular brands

QNAP QHora-301W, User Manual

Search results

Summary of Contents for QHora-301W

Reviews:

Related manuals for QHora-301W

Brands by name

Popular brands