WoL allows network administrators to perform maintenance on connected devices even if the device is
powered down. You can remotely power up sleeping devices by sending specially coded network packets to
devices equipped and enabled to respond to these coded packets.
Scanning for Connected Devices
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Devices > MAC History .
3. Click Scan.
QSS or QuNetSwitch scans for connected devices.
Sending a WoL Packet to a Device
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Devices > MAC History .
3. Identify a connected device.
4. Click .
The Send WoL Command window opens.
5. Specify a MAC address.
6. Click Wake.
QSS or QuNetSwitch sends a WoL command to the device.
Deleting a MAC Address
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Devices > MAC History .
3. Identify a connected device.
4. Click .
A dialog box opens.
5. Click Delete.
QSS or QuNetSwitch deletes the MAC address.
Clearing the MAC Address History
1. Log in to QSS, or open QuNetSwitch in QTS.
2. Go to Devices > MAC History .
3. Click Clear.
A dialog box opens.
4. Click Clear.
QSS or QuNetSwitch clears the MAC address history.
QGD Rackmount Switch User Guide
Switch Management
61
