QMS QDOC, User Manual

Page: 80 / 172

$GMXVWLQJWKH
7ULPPHU
4064'2&%RRNOHWPDNLQJ6\VWHP8VHUV*XLGH
3 Loosen the two locking wheels.
Turn them counterclockwise.
4 Turn the depth stop wheel to the right, and set it either at the
required booklet format marking or more to the right, based
on the number of pages in your booklet.
The booklet formats are 8.5" x 11" for 5.5” x 8.5" booklets and 11"
x 17" for 8.5" x 11" booklets.
The trimming position dial shows an area half the size of the short
edge of a booklet sheet. For an 5.5" x 8.5" booklet half the short
edge is 148.5 mm. For an 8.5" x 11" booklet, half the short-edge
of the 11" x 17" sheet is 210 mm. The dial allows further trimming
in millimeters (turn it to the right for further trimming).
The final trimming position adjustment is based on the number of
pages of the booklet. The more pages, the more the booklet must
be trimmed. As a rule of thumb, a booklet with 20 sheets may
require as much as 2-4 mm to be trimmed off.
» Note:
You might want to print one booklet and test the trimming,
then adjust it, print 1 more and test it, and so on until the desired
results are achieved.
81/2" x 11" 11" x 17"
/RFNLQJ
:KHHO
'HSWK6WRS
:KHHO
6HWWLQJVIRU
[
6HWWLQJVIRU
[