Installing
CrownCopy
QMS CrownCopy User`s Guide
1-8
7
Attach the other end of the SCSI cable to the printer.
Different versions of the
magicolor
printer have different interface
panels.
8
Use the appropriate power cord to attach the scanner to a
power source.
9
Turn on the scanner, wait 5 seconds, and then turn on the
printer.
»
Note:
If you connect the scanner (to the printer) and turn it on
and wait either less than 3 or more than 20 seconds before
turning on the printer, then after the printer system software is
updated a
NOT CONNECTED RECONNECT?
error message
displays on the printer control panel. Press the Copy/Select key,
select Yes, and the scanner will be automatically reconnected.
magicolor
LX
magicolor
CX
On the
magicolor LX
printer, the SCSI
port may be cov-
ered by a protec-
tive plate that
needs to be
removed.
» Note:
Don’t attach
the scanner to the
serial port, which
looks just like the
SCSI port.
On the
magicolor
CX printer, the
SCSI port is at the
bottom of the inter-
face panel.
SCSI Port
Serial Port
» Note:
Do
not attach
the scanner
here.
SCSI Port
