QMS 1660E, Getting Started

Page: 42 / 114

Printing a
Start-up Page
QMS 1660E Print System Getting Started 2-16
Printing a Start-up Page
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 1660E Print System.
The following information prints on the start-up page:
n
Printer product name
n
Cumulative number of printed sheets
n
Amount of resident RAM (in bytes)
n
Number of PostScript typefaces in ROM
n
Default resolution
n
Software version, revision, and release numbers
n
Firmware level number
n
Address and status (on or off line) of attached hard disk(s), if any
n
Emulation and protocol information for all standard and optional
interfaces
If the start-up page prints with all the start-up page information, and
the print quality is good, go to chapter 3, “Connecting to a PC,” or
chapter 4, “Connecting to an Ethernet Network.”
Otherwise, see chapter 6, “Troubleshooting,” of the Operation for
more information on printing a start-up page.
M
WARNING
!
Turn the printer off and unplug the power cord before
checking for correct printer installation.
ACHTUNG!
Schalten Sie bitte den Drucker aus und ziehen Sie auch
den Netzstecker heraus, bevor Sie die korrekte Installation des
Druckers überprüfen.