QMS 1660E, Getting Started

Page: 69 / 114

Configuring the
Network
4-15 Connecting to an Ethernet Network
OS/2 Version 1.x
If you’re using OS/2 version 2.
x
, skip to the next section.
» Note:
This is the standard method of adding a printer in OS/2
version 1.x. The procedure is repeated here for your convenience.
Add a Printer
1 With the Print Manager open, from the Setup menu choose
Printers...
2 In the Printers dialog box, choose Add...
» Note:
If you’re working with an existing printer, select the printer
name and choose Change.
The Add Printer (or Change Printer) dialog box appears.
3 In the Name field, type the printer name (only if you are add-
ing a printer).
The printer name is local to the workstation and is used to
associate queues with physical printers. It can be the same
as the name used at the printer.
4 In the Device box, select the printer’s pipe name.
Pipe names have the form \PIPE\QMS_
name
where
name
is
the printer’s default hardware address or the printer name
set in the “Interface Configuration” section, earlier in this
chapter.
5 Select IBMNULL as the printer driver.
6 If appropriate, fill in the Description and Printer Timeout
Transmission Retry boxes.
7 Choose Add... to return to the Printers dialog box.
» Note: If you’re working with an existing printer, choose Change.
8 In the Printers dialog box, choose OK to return to the Print
Manager.