QMS 1660E, Getting Started

Page: 43 / 114

Installing
Options
2-17 Setting Up Your Printer
Enabling/Disabling the Start-up Page
A start-up page automatically prints when you turn on your print sys-
tem. You can save time, paper, and toner by disabling the start-up
page. However, you may need the information included on the start-
up page after you have disabled the page (for example, to provide to
QMS Customer Technical Assurance).
You can disable (and enable) the start-up page in two different ways:
1 Use the PS Executive Series Utilities. See the PS Executive
Series Utilities on-line documentation for complete information.
2 Use the printer control panel (Administration/Startup Options/Do
Start Page menu). See “Enabling/Disabling the Start-up Page” in
chapter 4, “Printer Configuration,” of the
Reference for complete
information.
Installing Options
If you purchased any printer options, such as extra memory (SIMMs)
or a hard disk, you can install them now. If installation instructions are
included with the option, follow them. If not, installation instructions
are included in chapter 6, “Printer Options,” of the
Reference .
What's Next?
Now that you’ve set up your printer, go to chapter 3, “Connecting to a
PC,” or chapter 4, “Connecting to an Ethernet Network,” of this man-
ual to connect your printer to a host computer or network.
If you want to connect your printer to a single Macintosh or to an
AppleTalk network, you’ll need an optional LocalTalk interface. Refer
to chapter 6, “Printer Options,” in the
Reference for connection
instructions.