Qlogic QLogic 12000 Series, Installation Manual, Page: 73 / 126

Installation
Component LEDs
D000140-001 B 1-65
A
• DC voltages on the board are slightly out of tolerance (12V Bulk, 5V, 3.3V
and 1.8V are all monitored).
• The module can no longer function properly. The system will take the
appropriate actions to ensure that no damage is done to its components.
• Blinking Amber (once every four seconds) - LED test state.
RJ45 LEDs
The RJ45 connectors have two LEDs, Act and 100 . The 100 LED is Green when
a 100Mbps link is connected. The Act LED is Green when an Ethernet link has
been established, and blinking when the link is active.
12800 Fans and Power Supplies
Fan LEDs
Figure 1-53 12800 Fan LEDs
Fan LEDs indicate the following status(es):
• Green indicates that the fan is functioning properly.
• Amber indicates that the following warning condition exists:
• A single fan failure when the rotation speed is less than 4000 RPM or greater
than 10950 RPM.