Qlogic iSR6200, Software Manual

Page: 95 / 210

6–Command Line Interface
lunmask
ISR654608-00 B 6-21
0 0.0.0.0 00-c0-dd-13-2c-c4
1 0.0.0.0 00-c0-dd-13-2c-c5
2 20:00:00:c0:dd:13:2c:c4 21:00:00:c0:dd:13:2c:c4
3 20:00:00:c0:dd:13:2c:c5 21:00:00:c0:dd:13:2c:c5
Please select a portal to map the target from the list above ('q' to quit): 2
Target Device is already mapped on selected portal.
All attribute values that have been changed will now be saved.
The following example shows the
lunmask rm
command:
iSR6200 <1> (admin) #> lunmask rm
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:0a:09:80:85:95:82:2c,50:0a:09:81:85:95:82:2c
1 20:00:00:14:c3:3d:cf:88,21:00:00:14:c3:3d:cf:88
2 20:00:00:14:c3:3d:d3:25,21:00:00:14:c3:3d:d3:25
3 50:06:01:60:cb:a0:35:f6,50:06:01:68:4b:a0:35:f6
4 50:06:01:60:cb:a0:35:f6,50:06:01:60:4b:a0:35:f6
Please select a Target from the list above ('q' to quit): 0
Index (LUN/VpGroup)
----- -------------
0 0/VPGROUP_1
1 1/VPGROUP_1
2 2/VPGROUP_1
Please select a LUN presented to the initiator ('q' to quit): 1
Index Type Initiator
----- ---- -----------------
0 FC 20:00:00:1b:32:0a:61:80
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.