Qlogic iSR6200, Software Manual

Page: 50 / 210

5–Performing Data Migration
Typical Data Migration Process
5-2 ISR654608-00 B
Typical Data Migration Process
Table 5-1 shows the iSR6200 data migration process flow by category and
activity, and references the appropriate section for each.
Table 5-1. Data Migration Process Flow
Category Activity For Details, See…
Pre-Migration
1. Plan for data migration. Data Migration Service for iSR6200
Planning Guide
2. At the start of the project, clear the
migration logs.
“Viewing System and Data Migration Job
Logs” on page 5-20
3. Install license keys. “Installing a Data Migration License Key”
on page 4-2
4. Provide the iSR6200 access to LUNs
from source and destination arrays.
“Presenting LUNs to the iSR6200” on
page 5-3
5. Discover arrays and set array proper-
ties.
“Setting Array Properties” on page 5-8
6. Apply the array-based license key, if
an array-based migration license will
be consumed for this project. Other-
wise per-TB license is used automati-
cally.
“Applying an Array-based License to a
Specific Array” on page 4-4
7. For online data migration, present
source LUNs from the router to the
server and zone out direct paths from
the server to the source array.
“Presenting LUNs to the Server for
Online Data Migration” on page 5-5
Configure
Migration Jobs
8. Define user groups. “Creating a Data Migration Job Group”
on page 5-10
9. Configure and validate data migra-
tion jobs.
“Using the Data Migration Wizard” on
page 5-10