Qlogic iSR6200, Software Manual

Page: 102 / 210

6–Command Line Interface
migration add
6-28 ISR654608-00 B
a. Enter an I/O size between 32K and 1MB to optimize migration
performance based on the storage array under consideration.
b. (Optional) Enter a job name (maximum of 64 characters) to identify the
job.
c. Select one of the available migration groups.
d. Select a
Migration Start Time: 1
=Now,
2
=Delayed,
3
=JobSerialScheduling, or
4
=ConfigureOnly.
If you choose
Delayed
, the CLI prompts you to input the date
and time to begin job execution.
If you choose
JobSerialScheduling
, the CLI prompts you to
to assign a priority level at which the job should be started when
all the serial scheduled jobs are executed. The priority can range
between 1 and 256. The jobs with priority 1 are executed before
the scheduler executes jobs with priority 2.
The CLI informs you if the migration job is created successfully, and saves
any changes you have made.
The iSR6200 then schedules a migration job based on your inputs.
The following shows an example of scheduling an individual data migration job in
the CLI:
iSR6200 <1> (miguser) #> migration add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Migration Type (1=Online, 2=Offline) [ ] 1
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 00-00-00 HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:e1:49, 82-07-00 HP HSV200-1 Src+Dest
2 50:06:01:60:4b:a0:35:de, 82-03-00 DGC RAID-2 Src+Dest
3 50:00:1f:e1:50:0a:37:18, 00-00-00 HP HSV210-3 Src+Dest
Please select a Source Target from the list above ('q' to quit): 2
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3