Qlogic iSR6200, Software Manual

Page: 153 / 210

6–Command Line Interface
show perf
ISR654608-00 B 6-79
show perf
Displays the performance (in bytes) of the active job.
Authority
guest
Examples
The following examples show the
show perf
command:
iSR6200 <1> #> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 0 0 0
GE2 0 0 0 0 0
FC1 23M 0 0 0 23M
FC2 0 23M 0 0 23M
In the following example, 10GbE ports are present and show all the ports
connected:
iSR6200 <1> #> show perf
WARNING: Valid data is only displayed for port(s) that are not
associated with any configured FCIP routes.
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 0 0 0
GE2 0 0 0 0 0
10GE1 0 0 0 0 0
10GE2 0 0 0 0 0
FC1 0 0 0 0 0
FC2 0 0 0 0 0