QKM QD1 User Manual Download Page 4 | Manualshive

Page: 4 / 64

QKM QD1 User Manual Download Page 4

QD1 IO Expansion Module User Manual

II Document Version V3.1.0 (2020-08-18)

Copyright © 2020 QKM Technology (Dongguan) Co., Ltd.

All Rights Reserved.

QKM Technology (Dongguan) Co., Ltd. (hereinafter referred to as QKM) owns the

patents, copyrights and other intellectual property rights of this product and its software.

Without the written authorization of QKM, no unit or individual shall extract or copy the

contents of this document; and shall not directly or indirectly reproduce, manufacture,

process and use this product and related parts.

Trademark

is the trademark of QKM Technology (Dongguan) Co., Ltd. QKM has been

granted ownership of this trademark.

Disclaimer

QKM does not assume any direct, indirect, special or incidental loss or liability due to

improper use of this manual or product.

Notice

The contents of this document are subject to change at any time due to product upgrade
or other reasons. QKM reserves the right to change the product or specifications in this
manual without prior notice. To know the latest information of this product, please visit
QKM's website and download.

Tower A, Building 17, Headquarters 1, No. 4 Xinzhu Road, Songshan Lake High-tech
Industrial Development Zone, Dongguan City, Guangdong Province, China
Tel: +86 0769-27231381
Fax: +86 0769-27231381-8053
Zip code: 523808
Email: [email protected]
Website: www.qkmtech.com

«
...
2
3
4
5
6
...
»

Summary of Contents for QD1

































































Reviews:

No comments