Chapter 4
Document Version V3.1.0 (2020-08-18) 29
4.2.2 Configuration for connection to Web Server
Step 1
Open webpage with IE browser. Enter the IP address (e.g. 192.168.01) of
robot or controller in the address bar. If network connection is normal, click
to enter the interface as shown in Figure 4-6.
Figure 4-6 Open Web Server
Step 2
Open <Administrator>, <Control Panel> and <Teaching Panel> in
sequence. Choose Robot as needed. <Robot1> is default choice on the
page (If multiple robots are in the device and controlled in master-slave
mode, the master host Robot1 is preferred).
Figure 4-7 Select Robot