Chapter 4
Document Version V3.1.0 (2020-08-18) 27
If you cannot view the IP address of the module after clicking the <Scan>
button, click the <Settings> button to make configuration changes as
shown below, and click the <OK> button. Then click the <Scan> button
again.
Figure 4-3 Scan IP address
Step 4
Double-click the address under IP address bar to set a required IP address
and its subnet mask; you should turn off DHCP to fix the IP address of the
module, as shown in Figure 4-4:
Figure 4-4 Turn off DHCP