Chapter 3
Document Version V3.1.0 (2020-08-18) 23
Figure 3-8 Installation of network cable
Install the network cable according to configuration scenario and
with reference to Section 2.1 Communication networking. This
diagram only presents one example scenario for reference.
Step 2
Installation of IO signal wires
1.
(Optional step) View the definition of pins in Section 2.2.
2.
Produce an IO connector, as shown in Figure 3-9:
Figure 3-9 Production of IO connector
⚫
If the QD1 product you choose to buy is not equipped with a
standard IO plug, you can produce an IO plug by welding in
this way.
⚫
When connecting IO signal wires to the connector by welding,
the connector should match the motherboard/daughterboard
of economical QD1 symmetrically.
3.
Insert the IO connector into the IO interface, as shown in Figure 3-10:
Welding
Threading
Plug
assembly