—
8
—
Operation
Ignition Key
Two uniform ignition keys are
available, reserve one of them for
future use.
Instrument Panel
Odometer
①
It records the total mileage
accumulated since the motorcycle is
used.
Speedometer
②
It is used to indicate the
current speed in km/h.
Turning Lamp Indicator
③
When the turning switch lever
is set to the right, the right side
indicator is yellow; when to the left,
the left side indicator becomes
yellow.
Tachometer
④
It indicates the running speed
of the engine in rpm.
Hi Beam Indicator
⑤
The blue indicator will be lit
when the Hi beam headlamp is
switched on.
Gearshift Indicator
⑥
This indicator will show the
current gear where the motorcycle is.
There are all 5 speed shift levels.
The 5 number indicators will be lit
in turn on shifting. However, when
the gear shifter is set in the neutral
mode, they will extinguish, but only
neutral indicator N is lit.
Ignition Switch
H
P
U
S
I
I
I
GN
T
O
N
The ignition switch has three
positions
“ ” Position
The whole electrical circuit is
disconnected.
“ ”Position
The ignition circuit is switched
on so that the engine can be started.
It is impossible to pull out the
ignition key from this position.
“ ” Position
In order to lock the handlebar,
turn the bar to the left, then insert the
key. Rotate it clockwise to full stop
for locking the handlebar.
WARNING
If the handlebar is locked, the
motorcycle is never pushed any
longer; otherwise you will lose
balance.
