—
9
—
Left Handlebar Control System
Dimmer Switch
①
When the switch is set to
“ ” (high) position, the
headlamp will be switched to high
beam mode; the high beam indicator
on the instrument panel will be lit
simultaneously. When the switch is
set to “ ” (low) position, the
headlamp will be switched to low
beam mode.
Turning Switch
②
For turning signal operation,
set the switch to
“
”
(left)
position, the left turning signal lamp
will get lighting; if set to
“
”
(right) position, the right turning
lamps will be switched on. After
turning, move the switch to middle
position; the turning lamp will be
turned off.
WARNING
If you want to change to
another lane or to turn to another
direction, switch on the turning
signal lamp in time. After turning,
switch off the turning lamp in
time.
Horn Button
③
Press this button to make the
horn sound.
Clutch Lever
④
Grip this lever to disengage
the driving system at the time of
starting the engine or shifting the
gear. Disengage the clutch by
grasping the lever.
Control System of Right
Handlebar
Front Brake Lever
①
The front brake means that the
brake lever of the right handlebar is
gripped slowly towards the control
handle of the throttle. When gripping
the brake lever, the tail lamp of the
brake will be automatically lit.
Stop Switch of Engine
②
This switch, located on the top
of the control panel of the right
handlebar, is of swinging plate type.
Its shaft is placed on the center of
the plate. When it is on the “ ”
position, the engine will start only
after the circuit closes up. This is an
emergency switch.
If the switch is set on “ ”,
the starter motor can not start and
the starting circuit breaks
completely.
Throttle Grip
③
The grip is used to control the
speed of the engine. Turn it
anti-clockwise (towards yourself) to
speed up, conversely, turn it
clockwise to slow down.
