—
10
—
Electric start button
④
Hold both the front brake
handle bar and the rear brake handle
bar firmly, press the engine starter
button so as to start the electric
starter and ignite the engine.
Lamp Switch
⑤
“ ”Position:
All headlamp, front position-
ing lamp and tail lamp will be lit.
“ ”Position:
In “ ”position, the front
position lamp, panel lamp, tail lamp
are on.
“
●
” position:
Both headlamp and tail lamp
will get off.
Fuel Tank Cap
To open the cap, insert the
ignition key and turn it clockwise.
Then the cap can be removed
together with the key. To close the
cap, align with the arrow and push
down the cap and the key on the
hole of the tank cap till the locking
sound is heard. Finally pull out the
key.
1) Gasoline level 2) Gasoline inlet
WARNING
The gasoline tank should not
be overfilled. Never spill gasoline
on hot engine. Never add the fuel
over tank inlet as shown in the Fig.
Otherwise expansion of the
gasoline owing to higher
temperature will cause overflow.
The engine should be stopped
during the refilling, and the
ignition switch should be turned to
OFF. No smoking during the
refilling.
Gear Shift Pedal
This model of motorcycle is
equipped with a five-shift gear-in
transmission system. The working
order of the gearshift is as shown in
the Fig. The lever is connected to the
ratchet of the gearshift. It will return
automatically to its original position
after selection of a certain gear so
that it is possible to change to the
