Speedkid2 2018
Subject to change. 12|2017 –
23
Utilisation
f
Secure the belts using the belt buckles:
–
Thread each end of the belt in the buckle as it is
shown in the picture.
–
Be sure to check both belt buckles sit firmly.
f
Put the harness catch, including the pad, onto the
centre harness on the front of the seat. Use the
harness catch of the left or right seat to do this.
f
Repeat this procedure in reverse order whenever you
require the safety harnesses for carrying two children.
Embarking the children
Preparing the cabin
f
Apply the parking brake to secure the
Speedkid
in order to prevent it from rolling away.
f
Open the 2-in-1 cover completely.
f
Adjust the safety harnesses to the number of children, see
„Adjusting the safety harnesses“ on
page 22
.
f
Open the safety harnesses required:
–
Release the harness catch by pressing the
pushbutton.
–
Pull the two tabs out of the belt buckle.
–
Loosen the small locks which fix the belt cushions
in place.
Placing the children
f
Put a suitable bicycle helmet on children or use the optional available head rests.
f
Let the children get in one after the other, or lift them into the cabin.
f
If necessary, adjust the head rests by securing them to the seats at a different height with the
Velcro strips.
Tip!
A balanced load distribution is particularly important in Trailer mode. If the two children
differ greatly in terms of their weight, you should therefore put the heavier child in
the right-hand seat. Interacting with the tow bar mounted on the left, this favourably
influences handling.
