background image

4

 – 12|2017 – Subject to change. 

Speedkid2 2018

Introduction

Proper use

The 

Speedkid2

 was designed as a bicycle trailer and comes with an additional buggy and walker 

function. For 

Trailer mode

 use a tow bar with coupler to connect the trailer to a suitable towing 

vehicle (bicycle or motorised pedelec with a maximum speed of 25 km/h). With the buggy wheel 

attached, the 

Speedkid2

 can be used as a child carrier in 

Buggy mode

. In 

Walker mode

 you can you 

can use it when walking.
The 

Speedkid2

 dis for private transport only, carrying up to 2 children on paved routes. You can 

also carry baggage in the compartments intended for that purpose, provided that you observe the 

permissible weight limits and stow the baggage securely so that the load is evenly distributed. 

During the journey, each child must be secured in the seat by a safety harness. If you are carrying 

only one child, you must alter the harness arrangement as per the instructions in the chapter 

„Adjusting the safety harnesses“ on page 22

 so that the child is seated securely in the centre.

The 

Speedkid

 fulfils all safety requirements of the European standard for bicycles and 

bicycle trailers (DIN EN 15918). It also considers the wheeled child conveyanes norm EN 

1888. In Trailer mode, a rear light must be installed in accordance with the Road Traffic 

Licensing Regulations and to be in use in darkness or in conditions of poor visibility. 

 

Before using the 

Speedkid

, check which local regulations apply and how the product may be used.

It must not be used on unsurfaced ground, to transport baggage in the passenger compartment, 

to carry animals or for commercial use. It is essential to observe the limit values specified in the 

chapter 

„Performance  limits“  on  page  4 

and to check them before every journey. In all cases, 

the rider of the combination or the person using it in Buggy or Walker mode is responsible for the 

proper use and roadworthiness of the 

Speedkid2

.

Performance limits

The 

Speedkid2

 can only be safely used if you observe and adhere to the following performance 

limits in every mode:

Requirements for passengers

Weights

Permissible total weight (

Speedkid2

 + ch luggage) 

60 kg

Permissible payload (ch luggage)

43 kg

Maximum total weight of two children

36 kg

Maximum weight per child

22 kg

Luggage

7 kg

Age

Minimum age (without baby seat) 

The child must be able to sit up independently. For children 

aged up to 18 months, we recommend using a comfort insert.

6 months

Minimum age (with baby seat)

1 month

Maximum age

6 years

Size

Maximum height

116 cm

Summary of Contents for Speedkid2 2018





































Reviews: