12
– 07|2020 – Subject to change without notice.
Speedkid 2020
Below you can read all the information that you will need to assemble your
Speedkid
properly.
Make sure that you have sufficient space to assemble it. Also pay attention to the door width
at the place of installation: The
Speedkid1
is 77 cm wide with the wheel guards fitted and the
Speedkid2
is 87 cm wide.
»
Perform each of the instructions step by step.
»
If necessary, follow the QR code to call up a video about assembly and
operation on the Internet.
»
You can find our video tutorials on our YouTube channel
www.youtube.
com/user/Qeridoo
Danger!
Never perform assembly work if there are children in the cabin. Keep children
away from the vehicle during assembly.
When handling moving components, make sure that your hands or fingers do not
get trapped. Before first use, check all screw and plug connections for tightness.
Unfolding the cabin
»
Place the collapsed cabin in the assembly area.
»
Stand in front of the cabin and hold the tube of the
rear roof rack with one hand.
»
Open the cabin by pushing the tube upwards.
Assembly
»
Hold each of the side tubes of the folding system
by the lower part of the hinge.
»
Press both hinges down until they engage audibly.
VIDEOTU
TO
RIA
L
Unpack contents
»
Remove the packaging material and all protective caps, and dispose of them
in accordance with the environmental guidelines that apply in your region.
»
Cut the zip ties at the rear of the cabin
»
Read the chapter
„Assembly“ on page 12
before you assemble parts.
