background image

6

 – 12|2019 – Subject to change.

Sportrex 2020

Safety instructions

Danger!

Read the safely instructions below carefully.
The safety and accident prevention regulations valid in your region and statutory 

rules such as the road traffic regulations also apply, and take precedence in cases 

where there is doubt.
Make sure that the 

Sportrex

 is used only by persons suitable for its operation, as 

defined below. Users must have read and understood this user manual in full.

Caution!

The 

Sportrex

 is not a toy and must not be misused as such. This means that it  

is not permissible to attach the 

Sportrex

 to a child’s bicycle.

Users

 

»

Users are defined as the following persons:

 

Any person carrying out assembly work on the vehicle or changing the settings.

 

The rider of the towing vehicle in Trailer mode.

 

The operator in Buggy or Walker mode.

 

»

The user must be at least 16 years old and mentally mature enough to operate  

the 

Sportrex

 and transport children.

 

»

In Buggy mode, operation by a younger person is allowed if he / she is supervised 

 

by a person who meets the requirements stated above.

 

»

The user is at all times responsible for the proper use and roadworthiness of the 

Sportrex

.

 

»

Sportrex

 verantwortlich.

Conditions of use

 

»

The 

Sportrex

 must not be used for commercial or competitive purposes.

 

»

Check the screw connections for tight fit before the first use. In particular, the tow bar holder, 

the spokes and the thru axles of the wheels must be checked before use.

 

»

Before every journey, check that the 

Sportrex

 is in a proper and technically faultless condition.

 

»

Perform a visual inspection and in particular pay attention to the instructions and checklists 

in the chapter 

Maintenance intervals

 on page 33. The notes in the chapter 

Before every ride 

and 

Monthly (or every 200 km)

 also apply to the first use of the 

Sportrex

.

 

»

Also inform yourself about country-specific rules and traffic regulations if you are making 

trips across borders or if you want to take the 

Sportrex

 with you on trips abroad.

 

»

Before every journey, make sure that the requirements for the particular mode have been fulfilled.

 

»

In particular, pay attention to the table and the instructions in the chapter 

Setting the mode

 

on page 22.

 

»

In Trailer mode, a rear light must be indicated and operated on the left side of the push 

handle in accordance with the Road Traffic Licensing Regulations in darkness or conditions 

of poor visibility.

 

»

Before every journey, close the inner part of the 3-in-1 canopy so that the integrated insect net 

protects the children from insects and small stones. When in traffic, the weather canopy should 

also be closed and the ventilation window open to provide protection against exhaust fumes.

Summary of Contents for Q3-20













































Reviews: