22
– 12|2019 – Subject to change.
Sportrex 2020
Utilisation
Setting the mode
You can use the
Sportrex
in one of the following modes:
»
Trailer mode:
Carrying children in the
Sportrex
when cycling.
»
Buggy mode:
Using the
Sportrex
like a buggy.
»
Walker mode:
Carrying children in the
Sportrex
when walking.
To ensure enough headspace of the roll-over protection,
please note the correct position of the push handle in
trailer mode (see illustration).
The table below shows the main settings that you must make for particular components for the
respective mode:
Component
Status of the components in mode
Trailer
Buggy
Walker
Buggy wheel
must be completely
removed
fitted
(freely rotating)
fitted
(fixed)
Tow bar
directed forwards
(pay attention to tow
bar load!)
directed backwards directed backwards
Pennant
must be mounted
recommended
recommended
Push handle
secondlast snap-in
position (10 – 15 cm
above the roof)
comfortable height
comfortable height
Hand strap on
the push handle
–
wrapped around
a wrist
wrapped around
a wrist
5-point safety harness
must be fastened
must be fastened
must be fastened
Rear light
must work in poor
visibility or darkness
(follow the Road
Traffic Licensing
Requirements)
recommended in
poor visibility or
darkness
recommended in
poor visibility or
darkness
Bicycle
the correct coupler
must be installed
–
–
Danger!
Before every journey, make sure that necessary adjustments have been made
for the particular mode. For details of this, see the instructions in the following
sections.
5 – 15cm
