30
– 12|2019 – Subject to change.
Sportrex 2020
Using the ventilation windows
The purpose of the ventilation windows of the
Sportrex
is to improve air circulation in the cabin.
Lateral ventilation windows:
»
To open, release the Velcro fastener of
the window film in the cabin and fold it down.
»
To close, secure the window film with
the Velcro fastener again.
Rear ventilation window:
»
To open, roll up the splash water cover and
lock it with the top toggle fasteners.
»
To close, roll down the splash water cover and
attach it using the toggle fasteners on the side
and underneath.
Danger!
Open the ventilation windows on hot days or in heavy traffic in order to dissipate
warm air and exhaust fumes out of the cabin more quickly.
Adjusting the suspension
The leaf springs of the
Sportrex
are adjustable by simply moving the clamps.
Caution!
Make sure that the resilience is suitable for the current load each time you drive.
If you hear strokes while driving over bumps, then the suspension is set too softly.
Immediately adjust the setting by moving the clamp towards the wheel axle.
Danger!
Always set the same values on both leaf springs; different spring travels can
negatively influence the driving behavior.
»
To move the clamp on the leaf spring plates, loose
the knurled screw in order.
»
Move the clamp with the knurled screw according
to the following instructions:
–
Move the clamp all the way to the front when
you carry a very light child and little luggage
(soft suspension).
–
Move the clamp backwards for two children
and a lot of luggage (harder suspension).
»
Tighten the knurled screw firmly and set the same
value on the other leaf spring.
Utilisation
