84
☛
During the device standby, the
Screen DIM
and the
Screen Saver
contents cannot be seen on the screen. For further information refer to the
chapter §
Power manager and Screen Saver modes
☛
During the device standby, the NFC tag badging and the 125KHz tag badging are deactivated.
Here is the
power manager
task profile scope when a
power manager
task is executed with the
Very highly optimized
profile:
Function
Associated user preferences
Description
Screen: off
system_properties.persist.sys.power-manager.level.min.display-output.power-mode
= 0
Touch screen interactivity: no
system_properties.persist.sys.power-manager.level.min.hid.pointer-event.enable
= false
Volume mute: yes
system_properties.persist.sys.power-manager.level.min.sound-output.mute
= true
Volume level: 0
system_properties.persist.sys.power-manager.level.min.sound-output.volume
= 0
Backlight level¹ : 0
system_properties.persist.sys.power-manager.level.min.display-output.backlight
= 0
Here is the
power manager
task profile scope when a
power manager
task is executed with the
Highly optimized
profile:
Function
Associated user preferences
Screen: on
system_properties.persist.sys.power-manager.level.low.display-output.power-mode
= 1
Touch screen interactivity: yes
system_properties.persist.sys.power-manager.level.low.hid.pointer-event.enable
= true
Volume mute: yes
system_properties.persist.sys.power-manager.level.low.sound-output.mute
= false
Volume level: 0
system_properties.persist.sys.power-manager.level.low.sound-output.volume
= 50
Backlight level¹ : 0
system_properties.persist.sys.power-manager.level.low.display-output.backlight
= 50
¹
The backlight level from 0 to 100 allows to adjust the screen transparency. When the transparency is at its minimum, i.e value 0, the content can still
be seen by transparency.
Summary of Contents for TAB10b
