Qeedji TAB10b, User Manual

Page: 28 / 145

28
2.1.1 AQS operating system upgrade with a fqs firmware
The TAB10b device embeds an
AQS
operating system (V9.10.10 or above). It can be upgraded by some maintenance
.fqs
firmware having some
evolutive or corrective changes.
To update your TAB10b device with a new
AQS
operating system version, download the
aosp_qeedji-tab10-setup-9.YY.ZZ.fqs
firmware from the Qeedji
Website .
☛ Both
AQS
operating system upgrade or downgrade are supported.
☛ After an
AQS
operating system upgrade, the TAB10b device configuration, the user data partition and the user APK are kept.
The
AQS
operating system version upgrade can be done by:
uploading the
.fqs
firmware with the device configuration Web user interface. For further information, refer to the chapter § AQS operating
system upgrade with the device configuration Web user interface ,
putting the
.fqs
firmware on an USB storage device then by inserting it in the TAB10b USB-C connector, or through the third party equipment
connected to the USB-C connector. For further information, refer to the chapter § AQS operating system upgrade by USB ,
putting the
.fqs
firmware on the
.software/
directory of the WebDAV server. That requires to use credentials values of any connection profiles
except
Application user
. For further information, refer to the chapter § AQS operating system upgrade by WebDAV .
AQS operating system upgrade with the device configuration Web user interface
It is possible to upgrade the
AQS
operating system version of the TAB10b device by connecting to the device configuration Web user interface with
a Web browser and upload a
.fqs
firmware.
For further information, refer to the chapter § Maintenance > Firmware .
For further information about the connection to the device configuration Web user interface, refer to the chapter § Applicative user interface .
AQS operating system upgrade by USB
Prerequisite:
the TAB10b device needs to have a suitable power supply equipment allowing to support
AQS
operating system upgrade by the USB-C
connector.
Copy the
aosp_qeedji-tab10-setup-9.YY.ZZ.fqs
archive at the root directory of an USB storage device and insert it on the USB-C connector of the
TAB10b device (or on the third party equipment connected to the USB-C connector).
☛ In case several supported files type are present like
.fqs
,
.apk
and
.js
, only the
AQS
operating system will be done.
◬
If the USB storage device contains several supported
.fqs
firmware files, the
AQS
operating system upgrade can not be done and no
message appears.
Plug the USB storage device. This message should be displayed.
☛ The copy duration is depending on the
.fqs
firmware size. It is roughly 1 min.