35
APK installation with the device configuration Web user interface
It is possible to install
APK
on the TAB10b device by connecting to the device configuration Web user interface with a Web browser and upload a
.apk
file in the
.apps
WebDAV directory.
For further information, refer to the chapter §
.
For further information about the connection to the device configuration Web user interface, refer to the chapter §
APK installation by USB
☛
The necessary rights for each APK are temporarily granted during the APK installation.
Prerequisite:
the TAB10b device needs to have a suitable power supply equipment allowing to support APK installation by the USB-C connector.
Copy the
.apk
file at the root directory of an USB storage device and insert it on the USB-C connector of the TAB10b device (or on the third party
equipment connected to the USB-C connector).
☛
If the USB storage device contains several APK at the root, each APK is installed in the alphabetical order.
☛
To reinstall a same version of an APK, you have to remove it before.
☛
To upgrade an APK with a different signature, you have to remove it before.
Plug the USB storage device. This message should be displayed while the APK copy has not been completed.
This message is displayed until the USB storage device is unplugged.
Summary of Contents for TAB10b
